Diamond 20 CSB II

  1. Anasayfa
  2. CNC
  3. PO LY GIM CNC OTOMAT
  4. SWISS TYPE
  5. DIAMOND 20 CSB II/III SERİSİ
  6. Diamond 20 CSB II

Po Ly Gim Diamond 20 CSB II/III Serisi

Diamond 20 CSB II

Teknik Detaylar

Machine Features

Cross travel sub-spindle :
Cross travel sub-spindle design. The main and sub spindles can work either one at a time or simultaneously for reduced machining duration. This design brings multi-function front and rear machining.

Short remnant material :
With the optional rough material bushing, the remnant material can be 50mm (depending on the part length).

Raw material machining :
0.1mm material tolerance can be achieved by using the Rough material bushing.

Replaceable fixed / Driven toolholder set :
The 4 pc back stationary / driven tool holder is replaced by the newly designed replaceable fixed tool holder or driven tool holder. This enables increased tooling fiexibility.



Swiss Lathe Machine Examples:

 6 pcs cross working driven tool holder
 4 pcs I.D. stationary tool holder
 3 pcs front working driven tool holder
 3 pcs back working driven tool holder
 4 pcs back I.D. stationary tool holder
 4 pcs back I.D. stationary / working driven tool holder
 6 pcs O.D. turning tool holder (42Type with5 pcs O.D. turning tool)

 



 

Using Live Bushing with Guide Bush

Remnant Material 150 mm

Using Rough Material Bushing without Guide Bush

Remnant Material 50 mm

Standard Accessories:

  •  Controller: Mitsubishi
  •  Main spindle
  •  Back spindle
  •  Work light
  •  Coolant system
  •  Part off detective sensor
  •  Fixed bushing (Except 32B Ⅱ/ 32CSB Ⅱ/ 42B Ⅱ/ 42 CSB Ⅱ)
  •  Live bushing
  •  Part catcher
  •  6 pcs O.D. turning tool holder(42 Type with5 pcs O.D. turning tool)
  •  4 pcs I.D. stationary tool holder
  •  6 pcs cross working driven tool holder
  •  3 pcs front working driven tool holder
  •  4 pcs back I.D. stationary tool holder
  •  3 pcs back working driven tool holder
  •  4 pcs back I.D. stationary / working driven tool holder

Optional Accessories:

  •  Controller: Fanuc
  •  CS axis
  •  Rough material bushing(without guide bush)
  •  Chip conveyor + bucket
  •  2 pcs front I.D. stationary tool holder
  •     (available for B III / CSB III with belt type)
  •  Y2 Axis

Machine Specifications:

Items DIAMOND
20B Ⅱ
DIAMOND
20CSB Ⅱ
DIAMOND
32B Ⅱ
DIAMOND
32CSB Ⅱ
DIAMOND
42B Ⅱ
DIAMOND
42CSB Ⅱ
Working Range Max. Machining Dia. Ø20 mm Ø20 mm Ø32 mm Ø32 mm Ø42 mm Ø42 mm
Max. Machining Length Per Chucking 240 mm 240 mm 240 mm 240 mm 240 mm 240 mm
Max. Drilling Dia. (Main / Sub Spindle) Ø12 mm Ø12 mm Ø15 mm Ø15 mm Ø15 mm Ø15 mm
Max.Tapping Dia. (Main / Sub Spindle) M10 M10 M12 M12 M12 M12
O.D. Tooling Number of Tools 6 6 6 6 5 5
Dimension □12 × 12 × 120 □12 × 12 ×120 □16 ×16 ×120 □16 × 16 × 120 □16 × 16 × 120 □16 × 16 × 120
I.D. Tooling Number of Tools 4 4 4 4 4 4
Dimension 10 mm (ER16) 10 mm (ER16) 13 mm (ER20) 13 mm (ER20) 13 mm (ER20) 13 mm (ER20)
Cross Working Driven Tooling Number of Tools 6 6 6
Dimension 10 mm (ER16) 13 mm (ER20) 13 mm (ER20)
Speed 200-6000 r.p.m. 200-6000 r.p.m. 200-6000 r.p.m.
Front Working Driven Tooling Number of Tools 3 3 3
Dimension 10 mm (ER16) 13 mm (ER20) 13 mm (ER20)
Speed 200-6000 r.p.m. 200-6000 r.p.m. 200-6000 r.p.m.
Back I.D. Tooling Number of Tools 4+4 4+4 4+4 4+4 4+4 4+4
Dimension 10 mm (ER16) 10 mm (ER16) 13 mm (ER20) 13 mm (ER20) 13 mm (ER20) 13 mm (ER20)
Back Working Driven Tooling Number of Tools 3 3 3
Dimension 7 mm (ER11) 10 mm (ER16) 10 mm (ER16)
Number of Tools 4 4 4
Dimension 10 mm (ER16) 13 mm (ER20) 13 mm (ER20)
Speed 3000 r.p.m. 3000 r.p.m. 3000 r.p.m.
Spindle Spindle Hole Dia. Ø22 mm Ø22 mm Ø35 mm Ø35 mm Ø45 mm Ø45 mm
Spindle Speed 200-8000 r.p.m. 200-8000 r.p.m. 200- 7000 r.p.m. 200-7000 r.p.m. 200-5000 r.p.m. 200-5000 r.p.m.
Main Spindle Indexing Angle C axis C axis C axis C axis C axis C axis
Back Spindle Spindle Hole Dia. Ø22 mm Ø22 mm Ø35 mm Ø35 mm Ø45 mm Ø45 mm
Spindle Speed 200-8000 r.p.m. 200-8000 r.p.m. 200- 7000 r.p.m. 200-7000 r.p.m. 200-5000 r.p.m. 200-5000 r.p.m.
Max. Length for Front Ejection 60 mm 60 mm 60 mm 60 mm 80 mm 80 mm
Sub Spindle Indexing Angle C axis C axis C axis C axis C axis C axis
Rapid Traverse X1, Y1, Z1, X2, Z2 30 m/min 30 m/min 30 m/min 30 m/min 30 m/min 30 m/min
Motor Spindle Motor 3.7 kw 3.7 kw 5.5 kw 5.5 kw 7.5 kw 7.5 kw
Back Spindle Motor 3.7 kw 3.7 kw 5.5 kw 5.5 kw 5.5 kw 5.5 kw
Y1, Z1, Z1
X1, X2 Axis Motor
1 kw 1 kw 1 kw 1 kw 1 kw 1 kw
Y2 Axis Motor (Option) 1 kw 1 kw 1 kw 1 kw 1 kw 1 kw
Coolant Pump Motor 1 HP x 2 1 HP x 2 1 HP x 2 1 HP x 2 1 HP x 2 1 HP x 2
Lubrication Motor 4 W x 2 4 W x 2 4 W x 2 4 W x 2 4 W x 2 4 W x 2
Driven Tools Motor-fixed Arm 2.2 kW 2.2 kW 2.2 kW
Driven Tools Motor-back Replaced Toolholder Set 1.5 kW 1.5 kW 1.5 kW
(Option Y2 Axis) 2.2 kW 2.2 kW 2.2 kW
Machine Dimensions Center Height 1050 mm 1050 mm 1050 mm 1050 mm 1050 mm 1050 mm
Weight 3140 kg 3170 kg 3390 kg 3420 kg 3710 kg 3740 kg
Optional Y2 Axis 3550 kg 3800 kg 4210 kg
Machine Dimension 2500 × 1280 × 1780 2500 × 1280 × 1780 2550 × 1280 × 1780 mm 2500 × 1280 × 1780 2500 × 1280 × 1780 2500 × 1280 × 1780
Air Pressure Air Pressure 5 kg/cm 5 kg/cm 5 kg/cm 5 kg/cm 5 kg/cm 5 kg/cm
Air Supply 10 L/min 10 L/min 10 L/min 10 L/min 10 L/min 10 L/min

* We reserve the rights to change the specs below without any prior notification.

Menü