LPB-H Series
LPB-H series hydraulic tube and profile benders use hydromotor and planetary gearbox drive to bend large pipe and profile sections easily. 12 models from LPB-H 42 to 365.
12Models
0.75 – 44 kWMotor Power
50 – 360 mmShaft Diameter
153 – 800 mmRoll Diameter



Highlights
- 3 rolls driven by hydromotor and planetary gearbox
- Hydraulic side supports moving in 3 directions
- Two-speed working system
- Two digital readouts
- Movable control panel separate from the body
- Horizontal and vertical working on small models
Standard Equipment
- Welded steel frame
- Hardened standard rolls
- Hardened and ground shafts from special high-quality steel
- Side shafts move up and down hydraulically (large models)
Request a quote for the LPB-H Series Capacity Table Tube and Profile Bending
Technical Specifications
| Model | Motor power (kW) | Roll diameter Ø (mm) | Shaft Ø (mm) | Working speed (m/min) | Dimensions L×W×H (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| LPB-H 42 | 0.75 | 153 | 50 | 4.5 | 775×1035×1465 | 380 |
| LPB-H 45 | 0.75+1.1 | 153 | 50 | 4.5 | 775×1035×1465 | 404 |
| LPB-H 65 | 3 | 195 | 60 | 5 | 970×1620×1208 | 1060 |
| LPB-H 85 | 4 | 245 | 80 | 6 | 1020×1460×1350 | 1550 |
| LPB-H 105 | 7.5 | 315 | 100 | 7 | 1450×1980×1650 | 3130 |
| LPB-H 125 | 15 | 390 | 120 | 2–7.5 | 1700×2000×1950 | 4930 |
| LPB-H 165 | 11 | 500 | 160 | 3–6 | 2400×2550×2650 | 9680 |
| LPB-H 185 | 11 | 570 | 180 | 3–6 | 2250×2650×2600 | 11500 |
| LPB-H 205 | 15 | 580 | 200 | 2–5 | 2520×3100×3150 | 15700 |
| LPB-H 245 | 18.5 | 630 | 240 | 2–4 | 2500×3300×3250 | 19300 |
| LPB-H 305 | 37 | 740 | 300 | 2–4 | 4300×4850×3600 | 33000 |
| LPB-H 365 | 44 | 800 | 360 | 2–4 | 4500×5700×4100 | 53000 |
Special equipment: NC control, rolls for all kinds of pipe and profile, HEB-IPN-UPN bending and extraction attachments.
Capacity Table
| No | Profile | LPB-M 32 | LPB-M 37 | LPB-M 40 | LPB-H 42 | LPB-H 45 | LPB-H 65 | Rolls | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | |||
| 1 | ![]() | 50x10 20x6 | 1800 300 | 35x8 | 300 | 35x8 | 300 | 60x10 40x10 | 1000 500 | 60x10 40x10 | 750 400 | 60x10 20x5 | 500 250 | Standard |
| 2 | ![]() | 80x15# 30x6 | 900 400 | 50x12 | 400 | 50x12 | 400 | 80x10 60x10 | 500 500 | 80x10 60x10 | 400 400 | 80x20 50x5 | 500 250 | Standard |
| 3 | ![]() | 25x25 10x10 | 900 200 | 20x20 | 300 | 20x20 | 300 | 25x25 20x20 | 500 300 | 25x25 20x20 | 300 300 | 32x32 12x12 | 400 250 | Standard |
| 4 | ![]() | Ø30 Ø10 | 1000 200 | Ø22 | 230 | Ø22 | 230 | Ø30 Ø20 | 1000 350 | Ø30 Ø20 | 700 350 | Ø35 Ø10 | 350 250 | Optional |
| 5 | ![]() | Ø60x1.5 Ø25x1.5 | 1000 600 | Ø40x1.5 | 500 | Ø40x1.5 | 500 | Ø48x2 Ø30x2 | 900 300 | Ø48x2 Ø30x2 | 550 300 | Ø60x2 Ø15x1.5 | 600 200 | Optional |
| 6 | ![]() | 1 1/2"x2.9 1/4"x1.8 | 700 300 | 1"x2.3 | 450 | 1"x2.3 | 450 | 1 1/2"x2.9 1"x2.3 | 900 400 | 1 1/2"x2.9 1"x2.3 | 550 380 | Ø2"x3.91 Ø1 1/2"x2.77 | 400 200 | Optional |
| 7 | ![]() | 50x30x3 40x20x2 | 1200 800 | 30x15x2.5 | 500 | 30x15x2.5 | 500 | 60x40x2 50x30x2 | 2500 1000 | 60x40x2 50x30x2 | 2000 750 | 50x25x3 20x15x2 | 450 250 | Optional |
| 8 | ![]() | 40x3 30x2 | 1200 800 | 25x25x2 | 450 | 25x25x2 | 450 | 40x3 20x2 | 1500 450 | 40x3 20x2 | 1350 450 | 45x3 20x2 | 600 300 | Optional |
| 9 | ![]() | 40x40x5 30x30x4 | 700 400 | 35x35x5 | 400 | 35x35x5 | 400 | 50x50x5 40x40x5 | 1300 750 | 50x50x5 40x40x5 | 1100 600 | 60x60x6 30x30x4 | 650 350 | Optional |
| 10 | ![]() | 40x40x5 30x30x4 | 700 400 | 30x30x4 | 550 | 30x30x4 | 550 | 50x50x5 40x40x6 | 1400 850 | 50x50x5 40x40x6 | 1200 700 | 50x50x5 30x30x4 | 550 350 | Optional |
| 11 | ![]() | 50x6 20x3 | 700 400 | 30x30x5 | 300 | 30x30x5 | 300 | 40x3.5 25x3 | 400 250 | 40x3.5 25x3 | 400 240 | 60x7 20x3 | 550 250 | Standard |
| 12 | ![]() | 50x6 20x3 | 700 400 | 35x35x5 | 350 | 35x35x5 | 350 | 40x3.5 25x3 | 700 500 | 40x3.5 25x3 | 700 500 | 50x6 20x3 | 500 250 | Standard |
| 13 | ![]() | 50x6 20x3 | 700 400 | 35x35x5 | 300 | 35x35x5 | 300 | 40x3.5 25x3 | 400 400 | 40x3.5 25x3 | 400 400 | 60x7 20x3 | 500 250 | Standard |
| 14 | ![]() | – | – | UPN 40x20 | 350 | UPN 40x20 | 350 | UPN 65 UPN 40 | 2500 1300 | UPN 65 UPN 40 | 1800 900 | UPN 80 UPN 30 | 600 250 | Standard # |
| 15 | ![]() | – | – | UPN 35x18 | 500 | UPN 35x18 | 500 | UPN 65 UPN 40 | 2700 1500 | UPN 65 UPN 40 | 2300 1100 | UPN 65 UPN 30 | 600 250 | Standard # |
| 16 | ![]() | – | – | – | – | – | – | – | – | – | – | IPN 80 | 600 | Optional # |
| No | Profile | LPB-H 85 | LPB-H 105 | LPB-H 125 | LPB-H 165 | LPB-H 185 | Rolls | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | |||
| 1 | ![]() | 100x20 80x20 30x10 | 2000 800 300 | 100x20 30x10 | 800 400 | 125x25 30x10 | 1200 500 | 150x35 | 2500 | 180x30 | 2500 | Standard |
| 2 | ![]() | 125x25 60x5 | 600 300 | 200x30 160x35 80x5 | 1200 800 400 | 200x50 100x10 | 1000 500 | 270x50 | 1500 | 280x60 | 2000 | Standard |
| 3 | ![]() | 45x45 15x15 | 500 380 | 60x60 15x15 | 550 400 | 65x65 20x20 | 750 500 | 90x90 | 1500 | 110x110 | 2000 | Standard |
| 4 | ![]() | Ø50 Ø15 | 500 380 | Ø75 Ø15 | 800 450 | Ø80 Ø20 | 900 500 | Ø90 | 1800 | Ø110 | 2000 | Optional |
| 5 | ![]() | Ø100x2.5 Ø15x1 | 1200 380 | Ø125x2.5 Ø15x1 | 1400 450 | Ø160x4 Ø140x3 Ø50x2 | 2800 1500 500 | Ø150x4 | 6000 | Ø220x4 | 8000 | Optional |
| 6 | ![]() | Ø3"x5.48 Ø1/2"x2.77 | 800 380 | Ø4"x6.02 Ø1/2"x2.77 | 1500 450 | Ø5"x6.35 Ø3/4"x2.87 | 1500 500 | Ø6"x7.11 | 3500 | Ø8"x8.18 | 4000 | Optional |
| 7 | ![]() | 80x25x3 25x15x2 | 1200 350 | 100x40x4 25x15x2 | 1500 450 | 120x40x4 30x20x3 | 1800 500 | 150x50x5 | 4500 | 200x100x8 | 5000 | Optional |
| 8 | ![]() | 70x3 25x2 | 1400 350 | 80x5 25x2 | 1500 450 | 90x5 30x3 | 1800 500 | 120x6 | 4000 | 150x8 | 4500 | Optional |
| 9 | ![]() | 80x80x8 30x30x4 | 800 400 | 100x100x12 40x40x4 | 1000 700 | 120x120x12 40x40x4 | 1200 600 | 150x150x18 | 4000 | 160x160x15 | 2500 | Optional |
| 10 | ![]() | 70x70x7 30x30x4 | 700 450 | 100x100x10 40x40x4 | 1000 550 | 100x100x10 40x40x4 | 1200 600 | 140x140x14 | 5000 | 150x150x18 | 4000 | Optional |
| 11 | ![]() | 80x9 25x3.5 | 800 450 | 100x11 30x4 | 1000 400 | 100x11 30x4 | 800 500 | 150x15 | 2000 | 160x20 | 2500 | Standard |
| 12 | ![]() | 70x8 25x3.5 | 800 280 | 90x10 30x4 | 1000 400 | 100x11 30x4 | 1000 500 | 130x15 | 2500 | 150x20 | 3000 | Standard |
| 13 | ![]() | 80x9 30x4 | 800 280 | 100x11 30x4 | 1000 400 | 100x11 30x4 | 800 500 | 150x15 | 2000 | 160x20 | 2500 | Optional |
| 14 | ![]() | UPN 140 UPN 120 UPN 100 | 1600 900 800 | UPN 180 UPN 30 | 900 400 | UPN 220 UPN 180 UPN 40 | 1000 800 500 | UPN 280 | 2000 | UPN 350 | 2500 | Standard # |
| 15 | ![]() | UPN 140 UPN 120 UPN 100 | 1600 1000 800 | UPN 180 UPN 30 | 1000 400 | UPN 220 UPN 180 UPN 40 | 1200 900 600 | UPN 280 | 3000 | UPN 350 | 3000 | Standard # |
| 16 | ![]() | IPN 120 IPN 80 | 600 400 | IPN 180 IPN 80 | 1000 400 | IPN 220 IPN 80 | 1000 500 | IPN 300 | 3000 | IPN 360 | 3000 | Optional # |
| 17 | ![]() | – | – | HEB 100 HEA 120 | 1200 1000 | HEB 120 HEA 140 | 1200 1200 | HEB 180 | 3000 | HEB 200 | 2500 | Optional # |
| 18 | ![]() | – | – | – | – | UPN 120 UPN 100 | 10000 7500 | UPN 180 | 11000 | UPN 220 | 12000 | Optional ## |
| 19 | ![]() | – | – | – | – | IPN 160 IPN 140 IPN 100 | 5000 4000 2000 | IPN 180 | 4500 | IPN 220 | 5000 | Optional ## |
| 20 | ![]() | – | – | – | – | HEB 100 HEA 120 | 1600 4000 | HEB 120 HEA 160 | 4000 6000 | HEB 160 | 5000 | Optional ## |
| No | Profile | LPB-H 205 | LPB-H 245 | LPB-H 305 | LPB-H 365 | Rolls | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | Size (mm) | Min. bending Ø (mm) | |||
| 1 | ![]() | 200x50 | 3500 | 200x70 | 3800 | 250x100 | 3000 | 300x100 | 3000 | Standard |
| 2 | ![]() | 350x80 | 2500 | 380x80 | 2500 | 500x100 | 2500 | 550x120 | 3000 | Standard |
| 3 | ![]() | 120x120 | 3000 | 130x130 | 2500 | 180x180 | 2500 | 200x200 | 3000 | Standard |
| 4 | ![]() | Ø120 | 3000 | Ø150 | 3000 | Ø200 | 5000 | Ø225 | 6000 | Optional |
| 5 | ![]() | Ø273x5.6 | 11000 | Ø300x5.9 | 9000 | Ø350x6 | 10000 | Ø475x8.5 | 15000 | Optional |
| 6 | ![]() | Ø9"x6.3 | 4000 | Ø10"x9.27 | 5000 | Ø12x14.27 | 8000 | Ø16"x12.7 | 12000 | Optional |
| 7 | ![]() | 220x80x7 | 7000 | 300x100x10 | 8000 | 400x200x10 | 10000 | 500x250x15 | – | Optional |
| 8 | ![]() | 180x10 | 5500 | 200x10 | 6000 | 260x14 | 8000 | 300x15 | 10000 | Optional |
| 9 | ![]() | 180x180x16 | 3000 | 200x200x20 | 3000 | 200x200x28 | 5000 | 200x200x28 | 4000 | Optional |
| 10 | ![]() | 160x160x15 | 6000 | 180x180x18 | 6000 | 200x200x20 | 6000 | 200x200x28 | 7000 | Optional |
| 11 | ![]() | 200x20 | 3500 | 200x28 | 3000 | 240x28 | 3000 | 250x25 | 4000 | Standard |
| 12 | ![]() | 200x20 | 3500 | 200x20 | 3500 | 220x22 | 4000 | 250x25 | 5000 | Standard |
| 13 | ![]() | 180x10 | 6000 | 180x18 | 6000 | 200x20 | 6000 | 200x28 | 6000 | Optional |
| 14 | ![]() | UPN 380 | 3000 | UPN 450 | 3000 | UPN 550 | 3500 | UPN 600 | 4000 | Standard |
| 15 | ![]() | UPN 380 | 3500 | UPN 450 | 3500 | UPN 550 | 4000 | UPN 600 | 4500 | Standard # |
| 16 | ![]() | IPN 360 | 3500 | IPN 450 | 3500 | IPN 550 | 4000 | IPN 600 | 5000 | Optional # |
| 17 | ![]() | HEB 240 | 3000 | HEB 300 | 4000 | HEB 500 | 5000 | HEB 600 | 6000 | Optional # |
| 18 | ![]() | UPN 260 | 13000 | UPN 260 | 13000 | UPN 340 | 16000 | UPN 400 | 22000 | Optional ## |
| 19 | ![]() | IPN 260 | 11000 | IPN 300 | 13000 | IPN 360 | 11000 | IPN 400 | 22000 | Optional ## |
| 20 | ![]() | HEB 180 | 7000 | HEB 200 | 8000 | HEB 280 | 11000 | HEB 340 | 13000 | Optional ## |
# A special washer (spacer) may be necessary. ## Special attachment required. Capacities are based on plate with 260 N/mm² yield strength. Sizes and bending diameters are in mm.
Other Models
Get a Quick Quote
Tell us about your production needs and we will find the right machine together.




















