6012MQ Tube and Profile Fiber Laser Cutting Machine
The 6012MQ is a 3000 W fiber laser cutting machine that processes tubes and profiles up to Ø10 – Ø120 mm and 6 m long; the Max resonator, Raytools BM110 cutting head and XC4000T control deliver precise cutting.
General Information
Heavy-Duty Frame Design
Sectional welding optimizes the bed design and gives a long service life. The stable bed structure delivers precise cutting.
Ball Screw Z Axis
More efficient and stable than a standard sliding screw. It needs 30% less torque for motion, and the absence of backlash gives high positioning accuracy.
Schneider Electrical Components
Provides stable operation. As a global brand of French origin, spare parts are easy to obtain when needed.
Max Laser Resonator
High electro-optical conversion efficiency, good beam quality and wide modulation frequency, with high reliability, long life and no maintenance.
Raytools BM110 Cutting Head
An optimized optical design and smooth airflow improve cut quality, with automatic focusing and quick protective lens changes.
Servo Motor
The fastest amplifier response and a much shorter settling time. The vibration suppression function greatly improves tracking performance.
Gear Rack
Longer service life, more stable operation, higher speed and reliability. It guarantees a constant transmission ratio.
Industrial Water Chiller
Products selected from leading brands offer a good match between specifications and real-world performance.
Gearbox
Lowest backlash, maximum output torque and highest torsional stiffness. High efficiency, low noise, high precision and long life.
Raytools XC4000T Control Unit
Four-edge and center finding with real-time offset compensation to the tube center. Cuts L, U and H profiles, as well as round and rectangular tubes.
Automatic Lubrication System
Provides safe and economical operation.
Technical Specifications
| Tube Diameter (Working Range) | Ø10 – Ø120 mm |
|---|---|
| Maximum Tube Length | 6 m |
| Laser Power | 3000 W |
| Laser Resonator | Max |
| Center Wavelength | 1080 nm ±5 |
| Cutting Head | Raytools BM110, auto focus |
| Control Unit | Raytools XC4000T (Auto-centering support, Tube Nesting software) |
| Frame | CE-compliant, heavy-duty, new design |
| Motion System | Linear guide, ball screw Z axis, servo motor, gearbox, gear rack |
| Maximum Speed | 120 m/min |
| Acceleration | 1.2 G |
| Positioning Accuracy | ±0.02 mm/m |
| Repeatable Positioning | ±0.05 mm |
| Front / Rear Chuck | Pneumatic |
| Position Guide | Red dot |
| Maximum Cutting Thickness | Carbon steel ≤ 10 mm, stainless ≤ 6 mm, aluminum ≤ 6 mm |
| Cutting Gases | Oxygen, nitrogen, air |
| Water Cooling | Hanli |
| Lubrication | Automatic lubrication system |
| Electrical System | Schneider; 380 V, 50 Hz |
| Power Consumption | ≤ 28.5 kW |
| Fiber Module Life | > 100,000 hours |
| Full-length Tail Scrap | 70 mm |
| Operating Environment | 0–45 °C, 45–85% relative humidity |
| Dimensions (L × W × H) | 8070 × 1950 × 2100 mm |
| Weight (Approx.) | 2500 kg |
Components Used
| Name | Brand / Origin |
|---|---|
| Laser Resonator | Max |
| Fiber Laser Cutting Head | Raytools BM110 |
| Control Unit | Raytools XC4000T |
| Water Chiller | Hanli |
| Electrical System | Schneider – France |